Cookie Img
Back to top
Home » Products » Flamebloc » Bulab 501 - Curing Agent For 500

Bulab 501 - Curing Agent For 500

Bulab 501 - Curing Agent For 500
Bulab 501 - Curing Agent For 500
Product Code : 07
Product Description
Bulab 501

Curing Agent for Flamebloc® GS 500 and Flamebloc GS 502

Bulab 501 is the curing agent for Flamebloc GS 500 and Flamebloc GS 502 products. It is blended one part Bulab 501 to four parts Flamebloc GS 500 or 502 by volume. After blending, a five-minute induction period is suggested before the coating is ready for application.

After blending with Bulab 501, the product with curing agent can be stirred or blended with a mixer and paddle blade at slow speed avoiding cavitations and air entrapment, mixed for 3–5 minutes, and then the cured product is ready for application. The mixture is to be applied within 2-3 hours.

TYPICAL CHARACTERISTICS

Appearance................Clear to slightly hazy liquid

Density @ 25°C (77°F)...............1.18 – 1.23 g/ml

Approximate volume per kilogram........... 830 ml

pH (neat).................................................8.0 – 9.0

APPLICATION

Application of Bulab 501 when properly combined with Flamebloc GS 500 or 502 is easily accomplished with brush, roller, or spray, depending upon which product is used. Since these products are water-soluble, cleanup is accomplished with soap and water wash.

PACKAGING AND HANDLING

Bulab 501 is a liquid packaged in drums, intermediate bulk containers, and in bulk.

Refer to the Material Safety Data Sheet for suitable materials of construction for handling and storing this product.

Improper handling of this product can be injurious to workers. Observe all safety precautions shown on the label and in the Material Safety Data Sheet. 



Most Popular Products